Multi channel Gas monitor
This is world’s most compact, light weight, Micro controller based Multi channel Gas monitor with Individual Display. Flameproof version of TM-800/1600 is special developed and designed to meet industry requirement of Gas Monitors that need to be mounted in Hazardous area (Explosion/ Flame proof locations). These Monitors are enabling customer to save huge amount of money in Cable and Cabling cost. These models not only provide Gas reading for each channel but they also have Relay contacts and RS-485 output for external Audio-visual Alarms or for Data Loging respectively. Magnetic Key operated procedure provides ease of 1st time programming and routine calibration and maintenance. Flameproof models are available for Gas group IIA-IIB or for IIC. All the Explosion proof versions are PESO/CMRI/ERTL(E) approved
Application
- LPG / CNG Storage and Distribution
- Automotive Manufacturing
- Chemical Plants
- Petrochemical & Refineries
- Pharmaceuticals and Drug Manufacturers
- Power & Fertiliser Plants
- Waste Water Treatment & Effluent Treatment
Specification
Combustible | Toxic | Oxygen | |
|---|---|---|---|
| Gas Range | 0 - 100% LEL Combustible gas in air | CI2 : 0 - 5 upto 50 PPM S02 : 0 - 10 PPM HCN : 0 - 25 PPM H2S : 0 - 100 PPM CO : 0 - 1000 PPM VOC : 0 - 1000 PPM NH3 : 0 - 1000 PPM (Other Gases on Request) | 0 - 5, 10, 15, 20, 25, 30% V/V O2 0 - 1000, 1999 PPM O2 |
| Detector Type | 3 Wire Transmitter | 2 Wire Transmitter | 2 Wire Transmitter |
| Sensor Type | Catalytic Combustion OR Infrared | Electro Chemical Semi Conductor OR PID | Electro Chemical OR Galvanic |
| Alarms | Two Adjustable Alarm Levels, i.e. Alarm 1 and Alarm 2 | ||
| Display | 4 digit bright continuous LED digital read out for each Channel | ||
| Indicators | Alarm 1, Alarm 2 individual Red LED, Fault Amber LED | ||
| Contacts | Common : SPDT Potential free contact for Alarm 1, Alarm 2 & Fault Contacts Rated 230 V AC, 5 Amp | ||
| Output | Digital : Modbus RTU output standard, fully configurable 2 wire RS-485 | ||
| Power Supply | 230 V AC or 110 V AC, 50 Hz, Others on request | ||
| Dimensions | Non Flame proof
| ||
| Mounting | Wall / Surface Mounted | ||
| Protection | Dust and Weather proof to IP-65 standard (Optionally Flameproof) | ||
| Operating Temp. | 00 to 600 C | ||
| Humidity | 0 - 95% RH, Non-Condensing | ||
| Optional Accessories | Trilog software | ||